Concrete Stamp, 12"x12" 1Pcs Concrete Texturing Skin Cement Stamps Mats Realistic Floor Cement Mold Polyurethane Stone Texture Patterns for Walls Floors (1, 12"x12")

This thickened mat is made from sturdy PU material that is impact and wear-resistant for long life. Its clear stamped stone pattern adds a creative spark to dull concrete surfaces and adds a non-slip effect. It will provide the ideal solution for your unique interior or exterior decorating project!Key FeaturesCustomer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.DetailsPractical Handles: Two sturdy carrying handles on the back allow you to lift and remove the stamp pad quickly and easilyUneven Surface: The unevenly patterned surface can provide a good anti-slip effect when printed on a concrete floor. ApplicationIt is widely used in courtyard paths, driveways, swimming pool platforms, sidewalks, parking lots, etc. for imprinting concrete. It is suitable for both walls and floors.SpecificationColor: BlueMaterial: PU Style: ModernGross Weight: 1kg/2.22lbsProduct Size: About 30*30cm/12*12inConstruction Process of Embossed Floor1. The formwork erection, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.2. Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.3. Use special magnesium alloy edge finishing plaster to finish edges and corners as required.4. Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (3kg/6.6lbs per square meter), and the second time spreading the remaining 1/3.5. Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.6. After the initial setting of the color strengthening material, when the surface is dry and there is no obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.15kg/0.33lbs.7. Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.8. Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.9. After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.15kg/0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.Package Included1* Seamless Concrete Slate Pattern1* Edge TrimmerNotesPlease allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.