Analog 0-5V 0-10V 4-20mA Signal Generator with Rechargeable Battery Pocket Adjustable Voltage Current Simulator LB01G Calibrator (Size : 0-5V 0-10V 4-20mA)

BRT LB01GB (have rechargeable battery inside embedded)* If you need low cost None Battery inside type, pls click:2/3/4-wire 0-20mA 0-10V Signal Generator BRT LB01GNB* If need NEW Upgraded version, pls click:BRT LB02G 0-22mA -10V- +10Vsignal generator (Have 9 x fast output points)Main Features Support 24V operating power supply via wiring terminals and 5V from USB port, can be used in indoors or outside industrial site. 1000mAH 3.7V re-chargeable battery embedded inside, very convenient to use. High precision 0.01V, 0.01mA output and LED display output signal value accurately. Output range: passive or active 0-20mA, 0-10V, etc; output range and precision are programmable and adjustable. Small pocket size, put it in your pocket, very convenient to carry, save cost.*This Signal Generator has Battery inside.Technical ParametersReferential Application Circuits*Sampling resistance is only for reference, no needed to add when using our generator.Accuracy Testing ShowParameters Programming Steps1.Press down and hold button for 2 seconds to enter into parameter setting states, then LED meter displays "F001" (F001 is Parameter Code Number);2.Turn the Knob to change the parameter code number (When entering into “F002”, user needs to enter password "+ - - +" first. );3.When displaying parameters code number, Press down knob "OK" to enter into the corresponding parameter value setting state, then rotate knob to modify the parameters.4.Press down the knob "OK" to save parameters setting and exit. LED meter displays next parameters code number ( If haven't enter the password, the signal generator will be returned back to normally adjusting mode after setting "F001" value );5.Rotate the knob directly till the last parameter code number "Fend" is displayed, then press down the knob to confirm and save.The parameters sett

• Support 24V operating power supply via wiring terminals and 5V from USB port, can be used in indoors or outside industrial site.
• 1000mAH 3.7V re-chargeable battery embedded inside, very convenient to use.
• High precision 0.01V, 0.01mA output and LED display output signal value accurately.
• Output range: passive or active 0-20mA, 0-10V, etc; output range and precision are programmable and adjustable.
• Small pocket size, put it in your pocket, very convenient to carry, save cost.